Joint Undergraduate Engineering Program Home Page
Prerequisites may be waived by consent of the joint program faculty.
Engineering
ENGR 1010 Introduction to Engineering (1)
Course consists of a series of lectures on engineering, fields of study within engineering, the engineering profession, types of work activities, and professional registration. Introduction to team building and the teamwork approach to projects and problem-solving common in an engineering curriculum and in the engineering profession. Guest lecturers will participate.
ENGR 2310 Statics (3)
Prerequisites: MATH 1900 and PHYSICS 2111. Statics of particles and rigid bodies. Equivalent systems of forces. Distributed forces: centroids. Applications to trusses, frames, machines, beams, and cables. Friction. Moments of inertia. Principle of virtual work and applications.
ENGR 2320 Dynamics (3)
Prerequisite: ENGR 2310. Review of vector algebra and calculus. Kinematics of a particle. Newton's laws and the kinetics of a particle. Work and energy. Impulse and momentum. Kinematics of rigid bodies. General theorems for systems of particles. Kinetics of rigid bodies. The inertia tensor.
All courses listed below require admission to candidacy for a degree in the UMSL/ Washington University Joint Undergraduate Engineering Program. Prerequisites may be waived by consent of the Joint Program faculty. Audits are not permitted.
Chemical Engineering
JCHE 4430 Environmental Engineering Chemistry (3)
Prerequisite: CHEM 1121. Introduction to the engineering aspects of air, water, soil, and geosphere chemistry. Toxicology and hazardous wastes. Pollution sources, dynamics, and ultimate fates. Sampling, control strategies, and regulations.
Civil Engineering
J C ENGR 1451 Engineering Graphics (3)
Prerequisite: Junior standing. Techniques in graphic communication and problem solving and design utilizing freehand sketches and computer graphics. Principles of orthographic projection, pictorial drawing, sectional views, dimensioning and tolerancing. Computer drawing and modeling: layout techniques, editing commands, drawing management, and plotting. Design project: individual or small group assignments, the design process, preliminary drawings. This course is required for civil engineering majors.
J C ENGR 2160 Surveying (3)
Horizontal and vertical control surveys, including traverses, triangulation, trilateration, and leveling; basic adjustments of observations; geodetic data; coordinate systems. Basic route surveying, including horizontal and vertical curves.
J C ENGR 2620 Introduction to Environmental Engineering (3)
Prerequisites: MATH 2000 and CHEM 1121. The objective of this course is to introduce students to the field of environmental engineering. The course will emphasize basic principles of mass and energy conservation which govern physical, chemical and biological processes. Applications include the estimation of contaminent concentrations and the design of environmental controls.
J C ENGR 3350 Structural Engineering Material (3)
Prerequisites: ENGR 2310, JME 2410. Topics to be covered include: mechanical behavior of materials: static tension, compression and bending, yield criteria, dynamic effects, creep, fatigue; structure of metals: atomic bonding, crystal structure, imperfections, dislocations, iron-carbon alloy system, time-temperature-transformation relations, heat treatment of steel-alloy steels; concrete and compositions.
J C ENGR 3360 Civil Engineering Materials Lab (1)
Testing procedures, testing machines, use of laboratory equipment, analysis of data, and presentation of results. Laboratory tests on static tension, compression, bending, and torsion of metal specimens. Tests on wood. Determination of compressive and tensile strengths of concrete. Design of concrete mixes and verification of strength. Experiments in advanced topics in mechanics of materials.
J C ENGR 3410 Structural Analysis (3)
Prerequisite: J M ENGR 2410. A review of the calculation of reactions, shear, and bending moment. Definition, construction and use of influence lines. Deflections for statically determinate structures using the virtual work method. Analysis of statically indeterminate trusses using the method of consistent deformations. Analysis of continuous beams and planar frames using the consistent deformation, slope-deflection and moment distribution methods. The influence of span on strength, stability, and economy of structures. An introduction to structural analysis software.
J C ENGR 3420 Structural Design (3)
Prerequisites: J M ENGR 3250 and J C ENGR 3410. Fundamentals of structural design in steel, reinforced concrete, and timber. Familiarization with the sources of various design codes and practice in interpreting them. Computer graphics applications.
J C ENGR 3520 Environmental Engineering Science (3)
Prerequisite: J M ENGR 3700 (may be taken concurrently) or permission of instructor. Application of the basic principles of chemistry, microbiology, and fluid mechanics to the analysis of environmental problems, especially those involving control of water and land contamination. Properties of municipal and industrial waste water, solid waste, and hazardous waste. Estimation of assimilative capacity and other characteristics of receiving waters. Introduction to unit processes and unit operations used in the treatment of municipal and industrial waste water. Design of professes and facilities used for treating drinking water, waste water, and sludge disposal. Waste minimization and recycling in both industrial and municipal settings.
J C ENGR 3760 Hydraulic Engineering (3)
Prerequisite: J M ENGR 3700. The principles of open channel flow will be discussed and illustrated with practical examples. Methods for channel design, storm sewer, culvert and bridge analysis will be presented using the concepts of gradually-varied, steady flow. A design project using computerized analysis and design is used to implement concepts in a large practical application.
J C ENGR 4000 Independent Study (1-6)
Prerequisites: Junior standing and consent of faculty adviser. Independent investigation of a civil engineering topic of special interest to a student performed under the direction of a faculty member.
J C ENGR 4080 Environmental Engineering Laboratory - Water/Soil
(3)
Prerequisite: JCHE 4430. Laboratory experiments to illustrate the application of engineering fundamentals to environmental systems. Characterization and control of water/soil pollutants. Introduction to relevant analytical instrumentation and laboratory techniques. Laboratory work supported with theoretical analysis and modeling as appropriate.
J C ENGR 4090 Environmental Engineering Laboratory - Air (3)
Prerequisite: JCHE 4430. Laboratory Experiments to illustrate the application of engineering fundamentals to environmental systems. Characterization and control of air pollutants. Introduction to relevant analytical instrumentation and laboratory techniques. Laboratory work supported with theoretical analysis and modeling as appropriate.
J C ENGR 4100 Design of Timber Structures (3)
Prerequisites: J C ENGR 3410 and J C ENGR 3420. Study of basic physical and mechanical properties of wood and design considerations. Design and behavior of wood beams, columns, beam-columns, connectors, and fasteners. Introduction to plywood and glued laminates members. Analysis and design of structural diaphragms and shear walls.
J C ENGR 4160 Introduction to Elasticity (3)
Prerequisites: J C ENGR 141. Introduction to elasticity: indicial notation, stress and strain, material laws. Plane stress and plane strain problems and illustrations. Torsion of prismatic bars. Energy principles: virtual work, potential energy and complementary energy theorems, reciprocal theorems Introduction to plates and shells.
J C ENGR 4190 Soil Mechanics (3)
Prerequisites: J M ENGR 2410 and J M ENGR 3700. Basic geology as it relates to index and classification properties of soil. Exploration, sampling, and testing techniques. Soil compaction and stabilization. Capillary, shrinkage, swelling, and frost action in soils. Effective stress, permeability, seepage, and flow nets. Consolidation and consolidation settlements. Stresses in soil. Time rate of consolidation. Mohr's circle, stress path, and failure theories. Shearing strength of sand and clays.
J C ENGR 4200 Soil Exploration and Testing (1)
Prerequisite: J C ENGR 4190 (may be taken concurrently). Soil exploration; in-situ testing, laboratory testing of soil; processing of test data using a microcomputer; statistical analysis of test data; use of test results in the decision-making process.
J C ENGR 4220 Pre-Stressed Concrete Design (3)
Prerequisites: Senior status. Analysis and design of prestressed concrete members. Direct design of composite and noncomposite members for flexure. Design of continuous beams. Flexural strength, shear strength, and design of anchorage zone.
J C ENGR 4230 Construction Cost Engineering (3)
The students will examine cost engineering principles. Fundamentals will be reviewed and applied to problems of cost estimating , cost control, business planning and management science, profitability analysis, project management, and planning and scheduling. The course will conclude with the 3 ½ hour Interim Cost Consultant certification exam administered by the Association for the Advancement of Cost Engineers International. The Interim Level Certification Program allows recent graduates who have at least 4 years experience, in cost management to actively pursue the cost engineering principles certificate. The four years of experience may consist of appropriate college-level academic training (engineering, construction management, architecture, finance, quantity surveying, or other AACE training.
J C ENGR 4370 Matrix Structural Analysis (3)
Prerequisites: J C ENGR 3410. This course will cover analysis of framed structures, planar and 3-D, using beam--column elements and shear walls and floors. Flexibility and stiffness analyses are performed by generating the matrices and carrying through the analyses step by step with a matrix manipulator program. A commercially available program is used to check at least one problem.
J C ENGR 4390 Computational Structural Mechanics (3)
This course is an introduction to analysis and design of structures using finite elements. The topics covered include: elementary theory of elasticity, plate theories and buckling of plate structures, finite element formulation of 2-D elasticity and plate problems. Hands on use of commercial finite element software is emphasized throughout. A major design project is included.
J C ENGR 4440 Geographical Information Systems in Transportation (3)
Prerequisites: Junior standing. A practical, hands-on approach to spatial database design and spatial data analysis with Geographical Information Systems (GIS) as applied to planning and engineering. Course objectives are to examine how digital earth resources data are collected, stored, analyzed, and displayed. The emphasis will be on transportation problems, although additional applications will be discussed.
J C ENGR 4580 Structural Stability (3)
Prerequisites: Senior standing. This course will cover the following topics: classification of instability phenomena; imperfection sensitivity; illustration with mechanical models; systems with finite degrees of freedom,; postbuckling analysis using perturbation techniques; stability and nonlinear behavior of struts, plates, and cylindrical shells; nonconservation problems; and numerical methods.
J C ENGR 4600 Highway and Traffic Engineering (3)
Prerequisites: J C ENGR 2160 and senior standing. Study of basic highway design and traffic circulation principles. Study of design elements of alignment, profile, cross-section, intersection types, interchange types, and controlled-access highways. Investigation of functional highway classification. Traffic volume, delay and accident studies. Analysis of highway capacity of uninterrupted flow, interrupted flow. Freeway, ramp, and weaving sections.
J C ENGR 4620 Transportation Planning (3)
Prerequisites: Senior standing. This course will cover the following topics: fundamentals of multimodal transportation planning; urban study components, including study design and organization, origin-destination analysis, traditional traffic model processes of trip generation, distribution and assignment; urban transportation entity analysis (shopping centers, terminals, etc.); state and regional study components, including state and national needs and capital improvement programs, regional funding capabilities and related national transportation policy and legislative acts.
J C ENGR 4621 Traffic Operations and Analysis (3.0)
Prerequisites: Senior standing. Study of traffic system operations and analysis, microsimulation modeling, interchange types and the fundamentals of highway signing and marketing. Introduction into transportation analysis project management. Analysis and design techniques focus on microsimulation modeling and the Manual of Uniform Traffic control Devices. Material learned is integrated into a major design project.
J C ENGR 4630 Design of Steel Structures (3)
Prerequisites: J C ENGR 3410, J C ENGR 3420. Behavior and design of steel frames by “allowable stress” and “maximum strength” based on deterministic and LRFD (Load-resistance factor design) methods. Design of beams, columns, beam-columns, plate girders, connections, multistory frames, and bridge girders. Torsional design of steel structures. Plastic analysis and design of steel structures. Miscellaneous topics in structural steel construction and design.
J C ENGR 4640 Foundations (3)
Prerequisites: J C ENGR 3420, J C ENGR 4190 and J C ENGR 4200. Principal problems in design and construction of foundations for bridges and buildings. Bearing capacity of deep and shallow foundations; pressure on retaining walls and slope stability; modern developments in piling, cofferdams, open caissons, pneumatic caissons.
J C ENGR 4660 Advanced Design of Concrete Structures (3)
Prerequisites: J M ENGR 3250, J C ENGR 3410, J C ENGR 3420. Flexural behavior and design, strength and deformation of rectangular and nonrectangular sections, shear strength, beam-columns, long columns, slab systems, design of frames, and footings will be covered.
JC ENGR 4670 Structure Design Projects (3)
Prerequisites: Permission of instructor. Students carry out the complete design of typical and unusual building and bridge structures. Use of the computer as a design tool is emphasized. Projects are conducted in cooperation with production engineers.
J C ENGR 4720 Legal Aspects of Construction (3)
Prerequisite: Junior standing or permission of instructor. A survey of the legal problems of the construction manager. Including but not limited to, liability in the areas of contracts, agency, torts, assurance, bad judgment and oversight.
J C ENGR 4730 Construction Operations and Management (3)
Prerequisite: Junior standing. The construction industry, its development, components, and organization. Contracting methods. Applications and limitations. Selection of equipment using production analysis and economics. Field engineering, including form design, shoring, embankment design. Purchasing and change orders. Safety and claims.
J C ENGR 4740 Economic Decisions in Engineering (3)
Prerequisite: Junior standing. Principles of economics involved in engineering decisions. Decisions between alternatives based on the efficient allocation of resources. Topics include the time element in economics, analytical techniques for economy studies, and taxes.
J C ENGR 4741 Construction Project Planning Scheduling (3)
The course will familiarize students with the basic foundation of the construction scheduling process. Included will be a detailed survey of scheduling techniques in an integrated construction planning, scheduling, and control systems. Students will gain an understanding of the critical path method theory, legal implications, and practice. Students will learn to use commercial project management and scheduling software and apply it to a variety of construction problems and projects. (This course will be a combination of two intense weekend meetings, a weekly Internet contact, and two meetings for course introduction and testing.)
J C ENGR 4750 Introduction to Urban Planning (3)
Prerequisite: Senior standing. A focus on the fundamental factors and techniques that the civil engineer must consider: population, economic base, land use, urban design, regional analysis, fiscal analysis, zoning, and public facilities analysis. Synthesis of these techniques into a major student project, typically involving groups of three to six students. Each project is assigned by the instructor and usually involves a real-life situation or problem that requires original data collection. In-class presentation, discussion, and critique of each group project.
J C ENGR 4760 Site Planning and Engineering (3)
Prerequisite: Senior standing. A focus on the legal, engineering, and economic aspects of planning and design of facilities at a site-specific level. Concepts of legal and economic feasibility of site design are developed in conjunction with the study of civil engineering activities involved in dealing with urban design alternatives for residential, commercial, industrial, and recreational land uses. Case studies and review of current legislation affecting site planning and engineering are undertaken, culminating in a major design project.
J C ENGR 4810 Construction Technology (3)
A comprehensive study of the core construction methods and practices used on the jobsite today. Emphasizes the types of construction materials, technologies, and applications available to the contractor, their use and function on the project, and the importance and interrelationship of these factors to the success of the construction project delivery. (Saturday site visits required)
J C ENGR 4811 Inland Water Transportation and Port Plan (3)
Prerequisite: Senior standing. The study, evaluation, and analysis of site design parameters, system configurations, and policy and management issues of port and marine transportation with special emphasis on the Great Lakes and inland, coastal, and inter-coastal waterways.
J C ENGR 4820 Design of Water Quality Control Facilities (3)
Prerequisite: J C ENGR 3520. Application of environmental engineering principles to design of water and wastewater treatment facilities. Critical review of process design issues associated with physical, chemical, and biological treatment processes. Definition of problems and objectives, evaluation of alternatives, and use of these concepts in process design. Design-oriented class/group project.
J C ENGR 4840 Probabilistic Methods in Civil Engineering Design
(3)
Prerequisite: J C ENGR 3420 (may be taken concurrently). Probability concepts. Analytical models of random phenomena. Functions of random variables. Estimating parameters from data. Empirical determination of distribution models. Regression and correlation analyses. Monte Carlo simulation. Detailed examples of the application of probabilistic methods to structural, transportation, hydrologic, and environmental system design.
J C ENGR 4860 Design of Masonry Structures (3)
Prerequisite: J C ENGR 3420. History of masonry construction; masonry materials and components; loadings for masonry structures; fundamentals of working stress design; fundamentals of strength design; design of gravity load resisting elements; design of lateral load resisting elements; details, connections and joints; design of low-rise buildings; design of high-rise buildings; design for water penetration resistance; quality control/inspection.
J C ENGR 4950 Fundamentals of Engineering Review (1)
Prerequisites: Senior Standing. The topics found in most engineer-in-training exams will be reviewed and illustrated using examples. A discussion of the importance of licensing exams and the strategies for taking these exams will be discussed. The main topics for review include: engineering mathematics, basic chemistry, engineering mechanics, engineering economics, thermodynamics, electrical circuits, and material science.
J C ENGR 4990 Senior Civil Engineering Seminar
Prerequisite: Senior standing. Students will research assigned topics of importance to graduates entering the Civil Engineering profession and prepare oral presentations and a written report. Student presentations will be augmented by lectures from practicing professionals. Topics include professional registration, early career development, graduate study, effective presentations, construction quality, and case histories of civil engineering projects.
Computer Science
J CMP SC 1002 Introduction to Computing Tools: MATLAB Skills (1)
This course is aimed at the acquisition of MATLAB skills through hands on familiarization and practice. Students practice the array, vector, and mesh grid representations, use programming and plotting, and apply these skills to solve numerical problems and generate reports. (J CMP SC 1002 and CMP SCI 1250 can substitute for J CMP SC 1360)
Electrical Engineering
J E ENGR 2300 Introduction to Electrical Networks
(3)
Prerequisites: PHYSICS 2112 and MATH 2020 (may be taken concurrently). Elements, sources, and interconnects. Ohm's and Kirchhoff's laws, superposition and Thevenin's theorem; the resistive circuit, transient analysis, sinusoidal analysis, and frequency response.
J E ENGR 2320 Introduction to Electronic Circuits (3)
Prerequisite: J E ENGR 2300. Introduction to contemporary electronic devices and their circuit applications. Terminal characteristics of active semiconductor devices. Incremental and D-C models of junction diodes, bipolar transistor (BJTs), and metal-oxide semiconductor field effect transistors (MOSFETs) are developed and used to design single- and multi-stage amplifiers. Models of the BJT and MOSFET in cutoff and saturation regions are used to design digital circuits.
J E ENGR 2330 Electrical and Electronic Circuits Laboratory (3)
Prerequisite: J E ENGR 2300. Lectures and laboratory exercises related to
sophomore topics in introductory networks and basic electronics.
J E ENGR 2600 Introduction to Digital Logic and Computer Design
(3)
Prerequisite: J CMP SC 1260. Digital computers and digital information-processing system; Boolean algebra, principles and methodology of logical design; machine language programming; register transfer logic; microprocessor hardware, software, and interfacing; fundamentals of digital circuits and systems; computer organization and control; memory systems; arithmetic unit design. Occasional laboratory exercises.
J E ENGR 3300 Engineering Electro Magnetic Principles (3)
Electromagnetic theory as applied to electrical engineering: vector calculus; electrostatics and magnetostatics; Maxwell's equations, including Poynting's theorem and boundary conditions; uniform plane-wave propagation; transmission lines - TEM modes, including treatment of general, lossless line, and pulse propagation; introduction to guided waves; introduction to radiation and scattering concepts.
J E ENGR 3310 Electronics Laboratory (3)
Prerequisites: J E ENGR 2300, J E ENGR 2310 Laboratory exercises for juniors covering topics in computer-aided measurements, computer simulation, and electronic circuits.
J E ENGR 3320 Power, Energy, and Polyphase Circuits (3)
Prerequisite: J E ENGR 2300. Fundamental concepts of power and energy; electrical measurements; physical and electrical arrangement of electrical power systems; polyphase circuit theory and calculations; principle elements of electrical systems such as transformers, rotating machines, control, and protective devices, their description and characteristics; elements of industrial power system design.
J E ENGR 3360 Principles of Electronic Devices (3)
Prerequisite: PHYSICS 2112. Introduction to the solid-state physics of electronic materials and devices, including semiconductors, metals, insulators, diodes and transistors. Crystal growth technology and fundamental properties of crystals. Electronic properties and band structure of electronic materials, and electron transport in semiconductor materials. Fabrication of pn junction diodes, metal-semiconductor junctions, and transistors and integrated-circuit chips. Fundamental electrical properties of rectifying diodes and light-emitting diodes, bipolar transistors and field-effect transistors. Device physics of diodes and transistors, large-signal electrical behavior and high -frequency properties.
J E ENGR 3370 Electronic Devices and Circuits (3)
Prerequisite: J E ENGR 2320. Introduction to semiconductor electronic devices: transistors and diodes. Device electrical DC and high-frequency characteristics. Bipolar transistors, field-effect transistors, and MOS transistors for analog electronics applications. Transistor fabrication as discrete devices and as integrated-circuit chips. Large-signal analysis of transistor amplifiers: voltage gain, distortion, input resistance and output resistance. Analysis of multitransistor amplifiers: Darlington, Cascode, and coupled-pair configurations. Half-circuit concepts, differential-mode gain, common-mode gain, and differential-to-single-ended conversion. Transistor current sources, active loads, and power-amplifier stages. Applications to operational amplifiers and feedback circuits.
J E ENGR 3510 Signals and Systems (3)
Prerequisites: J E ENGR 2300 and J E MATH 3170. Elementary concepts of continuous-time and discrete-time signals and systems. Linear time-invariant (LTI) systems, impulse response, convolution, Fourier series, Fourier transforms, and frequency-domain analysis of LTI systems. Laplace transforms, Z-transforms, and rational function descriptions of LTI systems. Principles of sampling and modulation. Students participate weekly in recitation sections to develop oral communications skills using class materials.
J E ENGR 3620 Computer Architecture (3)
Prerequisite: J E ENGR 2600. Study of interaction and design philosophy of hardware and software for digital computer systems: Machine organization, data structures, I/O considerations. Comparison of minicomputer architectures.
J E ENGR 4050 Reliability and Quality Control (3)
Prerequisites: J M ENGR 3260 or MATH 1320
An integrated analysis of reliability and quality control function in manufacturing. Statistical process control, acceptance sampling, process capability analysis, reliability prediction, design, testing, failure analysis and prevention, maintainability, availability, and safety are discussed and related. Qualitative and quantitative aspects of statistical quality control and reliability are introduced in the context of manufacturing.
JE ENGR 4090 Patent Law for Electrical Engineers (3)
Prerequisites: Senior Standing. Analysis of the practical and legal steps with which an electrical engineer should be familiar regarding patent protection for electrical and electronic inventions. The course focuses primarily on the patent protection provided under the U.S. patent laws. Recent U.S. patents relating to electrical and electronic inventions are examined to better understand patents and the protection provided by patents. Copyrights, trademarks, trade secret, unfair competition and mask work protection are also discussed. The protection and marketing of ideas is also considered. The course provides a pragmatic review of intellectual property from an electrical engineering perspective to prepare for issues of commonly faced in industry and business today.
J E ENGR 4300 Engineering Electromagnetics Applications (3)
Prerequisite: J E ENGR 3300. Study of important applications of electromagnetic theory. Solution of electrostatic and magnetostatic problems involving Laplace and Poisson's equations subject to boundary conditions. Maxwell's equations, including boundary conditions for dielectrics and conductors, reflection and transmission characteristics with effects due to losses. Study of guided waves in rectangular and optical wave guides, including effects of dispersion. S-parameters and transmission networks, including S-matrix properties, relation to impedance, reflection coefficient, VSWR, and Smith chart. Study of antennas, including exposure to terminology and thinwire antennas.
J E ENGR 4340 Solid State Power
Circuits & Applications (3)
Prerequisites: J E ENGR 2320, J E ENGR 3510. Study of the strategies and applications of power control using solid-state semiconductor devices. Survey of generic power electronic converters. Applications to power supplies, motor drives, and consumer electronics, Introduction to power diodes, thyristors, and MOSFETs.
J E ENGR 4350 Electrical Energy Laboratory (3)
Prerequisite: J E ENGR 2330. Experimental studies of principles important in modern electrical energy systems. Topics: power measurement, transformers, batteries, static frequency converters, thermoelectric cooling, solar cells, electrical lighting, induction, commutator, and brushless motors, synchronous machines.
J E ENGR 4410 Control Systems (3)
Prerequisites: J E MATH 3170, J E ENGR 2300 [same as J M ENGR 4310] Introduction to automatic control concepts. Block diagram representation of single and multiloop systems. Multi-input and multi-output systems. Control system components. Transient and steady-state performance; stability analysis; Routh, Nyquist, Bode, and root locus diagrams. Compensation using lead, lag and lead-lag networks. Synthesis by Bode plots and root-locus diagrams. Introduction to state-variable techniques, state-transition matrix, state-variable feedback.
J E ENGR 4420 Digital Control Systems (3)
Prerequisite: J M ENGR 4310. The control of physical systems with a digital computer, microprocessor, or special-purpose digital hardware is becoming very common. Course continues J M ENGR 4310 to develop models and mathematical tools needed to analyze and design these digital, feedback-control systems. Linear, discrete dynamic systems. The Z-transform. Discrete equivalents to continuous transfer functions. Sampled-data control systems. Digital control systems design using transfer and state-space methods Systems comprised of digital and continuous subsystems. Quantization effects. System identification. Multivariable and optimum control.
Prerequisites: J E ENGR 3320. Introduction to the modeling and elements of power systems; machines, lines, and loads; load flow methods and applications; short circuit analysis using symmetrical components on symmetrical and unsymmetrical faults; methods of economic operation of power systems and contingency; state estimators, stability, and introduction of the independent system operator.
J E ENGR 4600 Switching Theory (3)
Prerequisite: J E ENGR 2600. Advanced topics in switching theory as employed in the analysis and design of various information- and material-processing systems. Combinational techniques; minimization, logic elements, bilateral devices, multiple output networks, symmetrical and iterative functions, threshold logic, state identification and fault detection, hazards, and reliable design. Sequential techniques: synchronous circuits, state tables, machine minimization, state assignment, asynchronous circuits, finite state machines.
J E ENGR 4630 Digital Integrated Circuit Design and Architecture
(3)
Prerequisite: J E ENGR 2320 and J E ENGR 3620. Brief review of device characteristics important to digital circuit operation, followed by detailed evaluation of steady-state and transient behavior of logic circuits. Implications of and design techniques for very large-scale integrated circuits including architecture, timing, and interconnection. Students must complete detailed design and layout of a digital circuit. Major emphasis on MOS digital circuits with some comparisons to other technologies.
J E ENGR 4640 Digital Systems Engineering (3)
Prerequisite: J E ENGR 2320. Design and characterization of digital circuits, reliable and predictable interconnection of digital devices, and information transfer over busses and other connections. Topics include: Review of MOSFET operation; CMOS logic gate electrical characteristics; System and single-point noise margin and noise budgets; Figures of merit for noise-margin and poser-delay product, and tradeoff between noise margin and propagation delay; Transmission-line driving including reflection, termination, non-zero transition time; lumped and distributed capacitance loads, non-linear terminations, and applicable conditions for lumped approximations; Coupled transmission lines, forward and backward crosstalk, short line approximations, ground bounce, and simultaneous switching noise; Timing, clocking, and clock distribution for digital circuits; Prediction of metastability error rates and design for acceptable probability of failure. Examples and design exercises using systems and interconnections selected from current Computer Engineering practice such as RAMBUS, PCI bus, GTL, LVDS, and others.
J E ENGR 4650 Digital Systems Laboratory (3)
Prerequisites: J E ENGR 2600, J E ENGR 2320
Procedure for reliable digital design, both combinational and sequential; understanding manufacturers’ specifications; use of special test equipment; characteristics of common SSI, MSI, and LSI devices; assembling, testing, and simulating design; construction procedures; maintaining signal integrity. Several single-period laboratory exercises, several design projects, and application of a microprocessor in digital design. Microprocessor programs are written in assembly language on a host computer and down loaded to the laboratory station for debugging. One lecture and one laboratory period a week.
J E ENGR 4710 Communications Theory and Systems (3)
Prerequisites: J E ENGR 3510 and J E MATH 3260. Introduction to the concepts of transmission of information via communication channels. Amplitude and angle modulation for the transmission of continuous-time signals. Analog-to-digital conversion and pulse code modulation. Transmission of digital data. Introduction to random signals and noise and their effects on communication. Optimum detection systems in the presence of noise. Elementary information theory. Overview of various communication technologies such as radio, television, telephone networks, data communication, satellites, optical fiber, and cellular radio.
Prerequisites: Senior Standing. This course will introduce and cover the architecture, protocols, security, and quality of service (QoS) of Internet Communications. Starting with the design principles and architecture of the Internet, communication applications such as Voice over IP (VoIP), video conferencing, and presence and instant messaging will be covered. Protocols developed by the Internet Engineering Task Force (IETF) including IP, TCP, UDP, DNS, SIP, XMPP, and ENUM will be studied. Latest areas of research including the Service Oriented Architecture (SOA) and peer-to-peer (P2P) architectures for Internet Communications will be covered.
J E ENGR 4820 Digital Signal Processing (3)
Prerequisite: J E ENGR 3510. Introduction to analysis and synthesis of discrete-time linear time-invariant (LTI) systems. Discrete-time convolution, discrete-time Fourier transform, Z-transform, rational function descriptions of discrete-time LTI systems. Sampling, analog-to-digital conversion and digital processing of analog signals. Techniques for the design of finite impulse response (FIR) and infinite impulse response (IIR) digital filters. Hardware implementation of digital filters and finite-register effects. The discrete Fourier transform and the fast Fourier transform (FFT) algorithm.
J E ENGR 4880 Signals and Systems Laboratory – Lecture/Lab (3)
Prerequisites: J E ENGR 3510. A laboratory course designed to complement the traditional EE course offerings in signal processing, communication theory, and automatic control. Signals and systems fundamentals: continuous-time and discrete-time linear time-invariant systems, impulse and step response, frequency response, A/D and D/A conversion. Digital signal processing: FIR and IIR digital filter design, implementation and application of the Fast Fourier Transform. Communication theory: baseband, digital communication, amplitude modulation, frequency modulation, bandpass digital communication. Automatic control: system modeling, feedback control systems, closed-loop transient and frequency response. Laboratory experiments involve analog and digital electronics, and mechanical systems. Computer workstations and modern computational software used extensively for system simulation, real-time signal processing, and discrete-time automatic control.
J E ENGR 4980 Electrical Engineering Design Projects (3)
Prerequisite: Senior standing. Working in teams, students address design tasks assigned by faculty. Each student participates in one or more design projects in a semester. Projects are chosen to emphasize the design process, with the designer choosing one of several paths to a possible result. Collaboration with industry and all divisions of the university is encouraged.
Engineering Communications
J E COMM 3100 Engineering Communications (3)Prerequisites:ENGL 1100 and junior standing. Persistent concerns of grammar and style. Analysis and discussion of clear sentence and paragraph structure and of organization in complete technical documents. Guidelines for effective layout and graphics. Examples and exercises stressing audience analysis, graphic aids, editing, and readability. Videotaped work in oral presentation of technical projects. Writing assignments include descriptions of mechanisms, process instructions, basic proposals, letters and memos, and a long formal report.
Engineering Mathematics
J E MATH 3170 Engineering Mathematics (4)
Prerequisite: MATH 2020. The Laplace transform and applications; series solutions of differential equations,
Bessel's equation, Legendre's equation, special functions; matrices, eigenvalues, and eigenfunctions; vector analysis and applications; boundary value problems and spectral representation; Fourier series and Fourier integrals; solution of partial differential equations of mathematical physics.
J E MATH 3260 Probability and Statistics for Engineering (3)
Prerequisite: MATH 2000. Study of probability and statistics together with engineering applications. Probability and statistics: random variables, distribution functions, density functions, expectations, means, variances, combinatorial probability, geometric probability, normal random variables, joint distribution, independence, correlation, conditional probability, Bayes theorem, the law of large numbers, the central limit theorem. Applications: reliability, quality control, acceptance sampling, linear regression, design and analysis of experiments, estimation, hypothesis testing. Examples are taken from engineering applications. This course is required for electrical and mechanical engineering majors.
Mechanical Engineering
J M ENGR 1413 Introduction to Engineering Design: CAD (2)
An introduction to engineering design in the context of mechanical engineering. Students learn the fundamentals of spatial reasoning and graphical representation. Freehand sketching, including pictorial and orthographic views, are applied to the design process. Computer modeling techniques provide accuracy, analysis, and visualization tools necessary for the design of devices and machines. Topics in detailing design for production , including fasteners, dimensioning, tolerancing, and creation of part and assembly drawings are also included.
J M ENGR 1414 Introduction to Engineering Design: Project (2)
An introduction to engineering design in the context of mechanical engineering. Students first complete a series of experiments that introduce physical phenomena related to mechanical engineering. Understanding is achieved by designing and building simple devices and machines. The course proceeds to a design contest in which the students design and build from a kit of parts a more significant machine that competes in a contest held at the end of the course. The course is open to all and is appropriate for anyone interested in mechanical devices, design, and the design process.
J M ENGR 2410 Mechanics of Deformable Bodies (3)
Prerequisites: MATH 1900 and ENGR 2310. Normal and shear stresses and strains. Stress-strain diagrams. Hooke's law and elastic energy. Thermal stresses. Stresses in beams, columns, torsional members, and pressure vessels. Elastic deflection of beams and shafts. Statically
indeterminate structures. Mohr's circle of stress. Stability concepts.
J M ENGR 3200 Thermodynamics (3)
Prerequisites: MATH 1900, CHEM 1111 and PHYSICS 2111. Classical thermodynamics, thermodynamic properties, work and heat, first and second laws. Entropy, irreversibility, availability. Application to engineering systems.
J M ENGR 3210 Energetics for Mechanical Engineers (3)
Prerequisite: J M ENGR 3200. Thermodynamic cycle analysis: vapor power, internal combustion, gas turbine, refrigeration. Maxwell relations and generalized property relationships for non ideal gases. Mixtures of ideal gases, psychrometrics, ideal solutions. Combustion processes, first and second law applications to reacting systems. Chemical equilibrium. Compressible flow in nozzles and diffusers.
J M ENGR 3221 Mechanical Design and Machine Elements (4)
Prerequisites: J M ENGR 1414, J M ENGR 1415, J M ENGR 2410, J E MATH 3170. Provides a thorough overview of the steps in the engineering design process and introduces analytical/quantitative techniques applicable to each step. Topics include recognition of need, specification formulation, concept generation, concept selection, embodiment and detail design. Includes an introduction to several classes of machine elements such as bearings, gears, belts, brakes, and springs. Underlying analytical model of the machine elements are presented along with guidelines about designing and choosing such elements for practical applications. A case study from industry will emphasize how the steps of the design process were done as well as the rationale for choosing particular machine elements.
J M ENGR 3250 Materials Science for J M ENGR (4)
Prerequisite: CHEM 1111. Introduces the chemistry and physics of engineering materials. Emphasis on atomic and molecular interpretation of physical and chemical properties, the relationships between physical and chemical properties, and performance of an engineering material.
J M ENGR 3360 Materials Science for J C ENGR (3)
Prerequisite: CHEM 1111. Same as J M ENGR 3250 but without the laboratory. Introduces the chemistry and physics of engineering materials. Emphasis on atomic and molecular interpretation of physical and chemical properties, the relationships between physical and chemical properties, and performance of an engineering material.
J M ENGR 3611 Materials Engineering (3)
Prerequisite: J M ENGR 3250. This course deals with the application of fundamental materials science principles in various engineering disciplines. Topics covered include design of new materials having unique property combinations, selection of materials for use in specific service environments, prediction of materials performance under service conditions, and development of processes to produce materials with improved properties. The structural as well as functional use of metals, polymers, ceramics, and composites will be discussed.
J M ENGR 3630 Nanotechnology Concepts and Applications (3)
The aim of this course is to introduce to students the general meaning, terminology and ideas behind nanotechnology and its potential application in various industries. The topics covered will include nanoparticles (properties, synthesis and applications, carbon nanotubes) properties, synthesis and applications, ordered and disordered nanostructured material and their applications, quantum wells, wires and dots, catalysis and self-assembly, polymers and biological materials, nanomanufacturing and functional nano-devices, health effects and nanotoxicity. The course will include several laboratory demonstrations.
J M ENGR 3700 Fluid Mechanics (3)
Prerequisites: J E MATH 3170 and ENGR 2320. Fundamental concepts of fluids as continua. Viscosity. Flow field: velocity, vorticity, streamlines. Fluid statics: hydrostatic forces manometers. Conservation of mass and momentum. Incompressible inviscid flow. Dimensional analysis and similitude. Flow in pipes and ducts. Flow measurement. Boundary-layer concepts. Flow in open channels.
J M ENGR 3710 Principles of Heat Transfer (3)
Prerequisites: J M ENGR 3200, J M ENGR 3700 and J E MATH 3170. Introductory treatment of the principles of heat transfer by conduction, convection, or radiation. Mathematical analysis of steady and unsteady conduction along with numerical methods. Analytical and semiempirical methods of forced and natural convection systems. heat exchangers: LMTD and e-NTU analysis. Boiling and condensation heat transfer. Radiation between blackbody and real surfaces. Radiation network analysis.
J M ENGR 3721 Fluid Mechanics Laboratory (1)
Prerequisite: J M ENGR 3700. Physical laboratory exercises focusing on fluid properties and flow phenomena covered in J M ENGR 3700. Calibration and use of a variety of equipment; acquisition, processing, and analysis of data by manual as well as automated methods.
J M ENGR 3722 Heat Transfer Laboratory (1)
Prerequisites: J M ENGR 3721 and J M ENGR 3710. Physical laboratory exercises, including some numerical simulations and computational exercises, focusing on heat-transfer phenomena covered in J M ENGR 3710. Calibration and use of variety of laboratory instrumentation; acquisition, processing, and analysis of data by manual as well as automated methods; training in formal report writing.
J M ENGR 4000 Independent Study (1-6)
Prerequisites: Junior standing and consent of the faculty adviser. Independent investigation of a mechanical engineering topic of special interest to a student performed under the direction of a faculty member.
J M ENGR 4041Current Topics in Mechanical Engineering Design (1)
Prerequisites: Senior Standing. Case studies of engineering failures, class discussion and short written papers are used to illustrate and stress the importance of engineering teamwork, ethics, and professional standards within the mechanical engineering discipline. Working in teams, students develop and present a case study on a topic of their choice. Guest lecturers introduce contemporary topics such as product liability, environmental regulations, green design, appropriate technologies, and concurrent engineering.
J M ENGR 4110 Mechanical Engineering Design Project ( 4)
Prerequisite: J M ENGR 3221. Feasibility study of an open-ended, original design or a creative redesign of a mechanical component or system requiring the application of engineering science principles. Feasibility is subject to economic, safety, legal, environmental, ethical, aesthetic, and other constraints in a competitive manufacturing environment. Project teams perform the detailed design and optimization of the concept developed in the feasibility study. Presentations and reports with manufacturing drawings and prototypes are completed by each team.
Prerequisites: Senior Standing. Analysis and design of advanced thermo-fluid systems. Student teams participate in the design process which could involve research, design formulations, codes, standards, engineering economics, a design project report, and formal presentations. Topics include: thermal-fluid systems and components, such as power, heating, and refrigeration systems, pumps, fans, compressors, combustors, turbines, nozzles, coils, heat exchangers and piping.
J M ENGR 4170 Dynamic Response of Physical Systems (2)
Prerequisites: ENGR 2320 and J E MATH 3170; J M ENGR 4170 and J M ENGR 4180 must be taken during the same semester. Free and forced vibration of mechanical systems with lumped inertia, springs, and dampers. Methods of Laplace transform, complex harmonic balance, and Fourier series. Electrical analogs. Introduction to Lagrange's equations of motion and matrix formulations. Transient response of continuous systems by partial differential equations, by Rayleigh methods, and by lumped parameters.
J M ENGR 4180 Dynamic Response Laboratory (2)
Prerequisite: J M ENGR 4170 and J M ENGR 4180 must be taken during the same semester. Laboratory problems focusing on materials covered in J M ENGR 4170.
J M ENGR 4240 Manufacturing Processes (3)
Prerequisite: Senior standing. Introduction to the processes used in making basic components for machines and structures. Emphasis is on the underlying scientific principles for such manufacturing processes as casting, forging, extrusion and machining.
J M ENGR 4250 Materials Selection in Engineering Design (3)
Prerequisite: Senior standing. Analysis of the scientific bases of material behavior in the light of research contributions of the last 20 years. Development of a rational approach to the selection of materials to meet a wide range of design requirements for conventional and advanced applications. Although emphasis will be placed on mechanical properties, other properties of interest in design will be discussed, e.g., acoustical, optical and thermal.
J M ENGR 4310 Control Systems I (3)
Prerequisite: J E MATH 3170, J E ENGR 2300 (same as J E ENGR 4410). Introduction to automatic control concepts. Block diagram representation of single- and multi-loop systems. Multi-input and multi-output systems. Control system components. Transient and steady-state performance; stability analysis; Routh, Nyquist, Bode, and root locus diagrams. Compensation using lead, lag, and lead-lag networks. Synthesis by Bode plots and root-locus diagrams. Introduction to state-variable techniques, state transition matrix, state-variable feedback.
J M ENGR 4440 Solar Energy (3)
Prerequisites: J M ENGR 3200, J M ENGR 3700, and J M ENGR 3710. This course will cover the following topics: extraterrestrial solar radiation; solar radiation on the earth's surface; weather bureau data; review of selected topics in heat transfer; methods of solar energy collection including flat panel and concentrating collectors; solar energy storage; transient and long-term solar system performance.
J M ENGR 4530 Facilities Design (3)
Prerequisite: Senior standing. The goal of the course is to provide the student with the information and analytical tools necessary to take a product design into production and for the design of an efficient manufacturing facility that will make the production feasible. Quantitative methods in the design of manufacturing facilities. Space allocation, assembly line design, material-handling systems, utilities and environmental design for manufacturing facilities. Facility-location selection. Plant-layout development. Building, organization, communications and support system design. Material-handling equipment, flow and packaging. Automated storage and retrieval systems design. Computer aided design of manufacturing facilities. Environmental requirements and design. Utilities design. In a major project, students will be required to analyze the design of a product and plan the manufacturing facility for its production.
J M ENGR 4800 Building Environmental Systems Parameters (3)
Sustainable design of building lighting and HVAC systems considering performance, life-cycle cost and downstream environmental impact. Criteria, codes and standards for comfort, air quality, noise/vibration and illumination. Life cycle and other investment methods to integrate energy consumption/conservation, utility rates, initial cost, system/component longevity, maintenance cost and building productivity. Direct and secondary contributions to acid rain, global warming and ozone depletion.
J M ENGR 4810 Air-Conditioning Systems and Equipment I (3)
Prerequisite: Senior standing. Survey of air conditioning systems. Moist air properties and conditioning processes. Adiabatic saturation. Psychrometric chart. Environmental indices. Indoor air quality. Heat balances in building structures. Solar radiation. Space heating and cooling loads.
J M ENGR 4820 Air-Conditioning Systems and Equipment II (3)
Prerequisite: Senior standing. Fluid flow, pumps, and piping design. Room air distribution. Fans and building air distribution. Mass transfer and measurement of humidity. Direct control of heat and mass transfer. Heat exchangers. Refrigeration systems. Absorption refrigeration.
J M ENGR 4900 Engineering Project Management (3)
Prerequisites: Senior Standing. Basic fundamentals and advanced concepts of engineering project management applicable to projects and programs, both large and small. Project management skills, techniques, systems, software and application of management science principles will be covered and related to research, engineering, architectural, and construction projects from initial evaluations through approval, design, procurement, construction and startup.